Subcategories
There are 206 products.
Lateral guying to the boom kit for DXBeam 5 el. 20m Yagi (DXM20-5).
PL-259 connector (UHF) without soldering the ground contact (assembly as with an N type connector - Sherlock system), for 7.3mm flexible coaxial cables. Gold plated centre pin and Teflon (PTFE) insulation.
1m 50 Ohms Professional coax jumper made with ULTRAFLEX 10 and 2 clamp connectors with PTFE insulation and heatshrink sleeve with resin.
100m insulating 3mm line for guying of antennas and tubular masts. Excellent performance in all climatic conditions (water, sun, icing), high breaking strain, very good RF insulation, more than 25 years lifetime!
PVC adhesive tape 25m x 19mm x 0.13mm, electrical quality, lead free, coated with an extremely strong adhesive rubber which allows it to be stretched for easier application. Working temperature from -40°C to +105°C.
The "peace of mind" pack for your antennas and connections with these two greases (copper and aluminium) at a reduced price.
SMA gold plated Right-angle Plug connector Radiall R125.172 for small coaxial cable Ø 2.6mm
Strong Guy clamp for Ø 25-52 mm tube, 2 ribbed jaws for Ø 20 to 55 mm masts, with screw.
20/15/12/10 meter 8 element beam Moxon/Yagi (14-21-24-28 MHz) DXBeam (Ref. DXB20151210-8mx)
6 meter 9 element beam Yagi (50 MHz) DXBeam (DXM6-9)
Lateral guying to the boom kit for DXBeam 5 el. 17m Yagi (DXM17-5).
PL-259 connector (UHF) with soldering for cables between 5mm. Gold plated centre pin and Teflon (PTFE) insulation.
200m insulating 3mm line for guying of antennas and tubular masts. Excellent performance in all climatic conditions (water, sun, icing), high breaking strain, very good RF insulation, more than 25 years lifetime!
Universal grounding kit for all coaxial cable (rigid, semi-rigid or flexible) to a diameter of 1/2 inch.
The "peace of mind" pack for your connections and rotor/bearing with these two greases (copper and rotor) at a reduced price.
N Chassis Mount Socket 4 holes. Gold plated centre pin and Teflon (PTFE) insulation.
Lateral guying to the boom kit for DXBeam 6 el. 15m Yagi (DXM15-6).
20/17/15/12/10 meter 10 element beam Moxon/Yagi (14-18-21-24-28 MHz) DXBeam (Ref. DXB2017151210-10mx)
PVC adhesive tape 25m x 38mm x 0.13mm, electrical quality coated in very strong solid rubber which particularly allows it to be stretched for easier application. Working temperature from -10ºC to +80ºC.
PL-259 connector (UHF) without soldering the ground contact (assembly as with an N type connector - Sherlock system), for 5mm flexible coaxial cables. Gold plated centre pin and Teflon (PTFE) insulation.
Mounting of your connector on ULTRAFLEX 7 and protection by a heat-shrink sleeve including a thermoplastic resin (connector not included in the assembly price)
300m insulating 3mm line for guying of antennas and tubular masts. Excellent performance in all climatic conditions (water, sun, icing), high breaking strain, very good RF insulation, more than 25 years lifetime!
Grounding kit for all coaxial cable (rigid, semi-rigid or flexible) to a diameter of 1/4 inch.
Universal mounting bracket which allows for the lengthening of a tube or to make an arm with a 90° offset. ERARD 800998.
The "peace of mind" pack for your connections and mast/cable with these two greases (copper and mast) at a reduced price.
Heat shrink sleeves, 40 cm long. Use diameter 18 to 6 mm (shrink ratio 3:1). Interior covered in a thermoplastic resin.
Lateral guying to the boom kit for DXBeam 6 el. 12m Yagi (DXM12-6).
0.5m 50 Ohms Professional coax jumper made with ULTRAFLEX 7 and 2 clamp connectors with PTFE insulation and heatshrink sleeve with resin.
SO239 Chassis Mount Socket (UHF female) 4 holes. Gold plated centre pin and Teflon (PTFE) insulation. Threading long.
Multi-use mount for wall, drawbar of caravan... for mast Ø 25 to 50 mm. ERARD 800880
Cable equipped with clip and copper terminal. Low cost universal grounding cable for all coaxial cable (rigid, semi-rigid or flexible) to a diameter of 1/2 inch.
The "peace of mind" pack for your rotor/bearings and masts/cables with these two greases (rotor and mast) at a reduced price.
Heat shrink sleeves, 25 cm long. Use diameter 9 to 3 mm (shrink ratio 3:1). Interior covered in a thermoplastic resin.
Lateral guying to the boom kit for DXBeam 7 el. 10m Yagi (DXM10-7) or 7 el. 11m Yagi (DXM11-7).
SMA male to SO239 (PL259 female) adapter 50Ω. Gold plated and PTFE insulation.
