SMA male to PL259 Adapter
SMA male to SO239 (PL259 female) adapter 50Ω. Gold plated and PTFE insulation.
Subcategories
There are 208 products.
SMA male to SO239 (PL259 female) adapter 50Ω. Gold plated and PTFE insulation.
1m 50 Ohms Professional coax jumper made with ULTRAFLEX 7 and 2 clamp connectors with PTFE insulation and heatshrink sleeve with resin.
2 thick heat shrink sleeves, 10 cm long. Use diameter 12 to 3 mm (shrink ratio 4:1). Interior covered in a thermoplastic resin.
The "peace of mind" pack for your antennas and rotor/bearing with these two greases (aluminium and rotor) at a reduced price.
SO239 Chassis Mount Socket (UHF female) 2 holes. Gold plated centre pin and Teflon (PTFE) insulation. Threading long.
N female-female professional jack to jack adapter panel mount. PTFE insulation.
The Gripple® hanger is the quickest system for putting in place guying for vertical or wire antennas with 2.6 or 3mm monofilament.
Stainless steel bracket and hardware for radioelectric contacts, equipped with 1.5m cable with 2 terminals and hardware.
2 thick heat shrink sleeves, 10 cm long. Use diameter 22 to 6 mm (shrink ratio 4:1). Interior covered in a thermoplastic resin.
The "peace of mind" pack for your antennas and mast/cable with these two greases (aluminium and mast) at a reduced price.
SO239 Chassis Mount Socket (UHF female) 2 holes. Gold plated centre pin and Teflon (PTFE) insulation. Threading standard.
Adjustment Key for Gripple® hanger. Adjusts quickly and unlock the fasteners for our insulating wire of 2.6 or 3mm.
The "peace of mind" pack for your towers, masts, rotators, antennas and connections with these four greases (copper, aluminium, rotator and mast) at a reduced price.
Aluminium bracket and stainless steel hardware for radioelectric contacts
Thick heat shrink sleeves, 20 cm long. Use diameter 56 to 17 mm (shrink ratio 3:1). Interior covered in a thermoplastic resin. Ideal for aerial self repair.
PL259 (UHF) female-female jack to jack adapter. 50Ω. Teflon (PTFE) insulation.
2nd HAND: Professional coaxial jumper. 50 Ohms 1/4" superflexible coaxial RosenbergerSLink provided with two DIN 7/16 connectors (1 straight female chassis + 1 right-angle male). Length: 1,20m.
10 bolts (bolt, screw, washers and lock washers) Ø M 8mm, 25mm long, in stainless steel.
5 small pre-drilled brackets in marine quality stainless steel useful for all attachments subject to bad weather (boxes, control panels, baluns etc).
Professional coaxial jumper. 50 Ohms 1/2" superflexible coaxial RosenbergerSLink SL 012S PE provided with two DIN 7/16 connectors (1 straight female + 1 right-angle male). Length: 1,50m.
12 QUICK CLAMPS + 1 ADJUSTMENT KEY usable indefinitely + 12 stainless steel ROPE THIMBLE.
N-Male Huaxing Connector for 1/2" superflexible coaxial cable (as Andrew HELIAX® FSJ4-50 or CELLFLEX® LCF12-50J).
5 small pre-drilled brackets with a fixed cross brace in marine quality stainless steel useful for all attachments subject to bad weather (boxes, control panels, baluns etc).
Professional low loss pigtail. 50 Ohms coaxial SUHNER S03262 B-60 (4.6mm) provided with two SMA-male right angle connectors. Length: 103cm.
N-Female Andrew L1TNF-PL "Positive lock" Connector for 1/4" foam coaxial cable (especially Heliax LDF1-50).
N-Female Andrew L1PNF Connector for 1/4" foam coaxial cable (especially Heliax LDF1-50).
5.8mm insulated cable for guying of small masts. Sold by the metre (discount). Excellent performance under climatic conditions (water, sun, ice), high breaking strain, very good RF insulation, lifespan of more than 40 years!
N-Female Delta Ohm (Acome) 08-250-132 Connector for 1/4" foam coaxial cable.