Mounting of your connector on ULTRAFLEX 7 and protection by a heat-shrink sleeve including a thermoplastic resin (connector not included in the assembly price)
DX AVENUE takes care of assembling your connectors and protects them with a heat shrink sleeve including a thermoplastic resin. This combination ensures tear resistance, coaxial seal and connector, and cable reinforcement where it is usually stressed. The connectors, however, remain removable when needed (see also the note at the bottom of this description). Each assembly is professional quality and each string is rigorously tested.
The price corresponds to the assembly and sealing of one cable clamp connector (whatever the model) on ULTRAFLEX 7 coaxial cable. The connector is not included in the assembly price.
At the same time as the assembly, you must order separately the ULTRAFLEX 7 coaxial cable and the required CLAMP connectors.
After paying your order, do not hesitate to send us your comments. If any doubt remains, we will contact you before any assembly.
Sample message: I ordered 25 m of Ultraflex 7, four PL259 connectors, and two mounts. I want a 1 meter cord with a PL259 on each side. The rest (24 m and 2 connectors) is shipped unassembled.
Another example of message: I ordered 2 m of Ultraflex 7, two N connectors, two PL259 connectors and four mounts. I want a cord of 0.5 m with 2 PL259 mounted, and a cord of 1.50 m with 2 N plugs mounted.
WARNING ! Given their specific implementation, the cables equipped with connectors will not be taken back or exchanged (especially if you are wrong in the type of connectors or in the length of the cable), except for an error on our part or a manufacturing defect!
Note on sealing : For outdoor use (antenna, switch ...), plan to strengthen the tightness especially between the various connectors. Our self-vulcanizing tape and sealant are particularly suitable for this purpose. Don't overlook your connections... It would be a pity to gain a few dBs from an antenna and lose them through a defective connection or a poor quality patch lead!
Self amalgamating tape (length 10m) to waterproof, insulate and protect against damp and rust. Very high resistance to water and ozone as well as high voltages.
PVC adhesive tape 25m x 19mm x 0.13mm, electrical quality, lead free, coated with an extremely strong adhesive rubber which allows it to be stretched for easier application. Working temperature from -40°C to +105°C.
Insulating mastic, rubbery, self-sealing, black in colour. Resistant to water and ozone. Supple, large and thick, it can be stretched to suit the application. Wide range of working temperature: up to +130°C (+90°C continuous). 1m X 51mm.
PVC adhesive tape 25m x 38mm x 0.13mm, electrical quality coated in very strong solid rubber which particularly allows it to be stretched for easier application. Working temperature from -10ºC to +80ºC.
Mounting of your connector on ULTRAFLEX 10 and protection by a heat-shrink sleeve including a thermoplastic resin (connector not included in the assembly price)
3M Insulating mastic, rubbery, self-sealing, black in colour. Resistant to water and ozone. Supple, large and thick, it can be stretched to suit the application. Wide range of working temperature: up to +80°C. Large surface: 1.5m X 38mm, thickness 3.2mm.
1m 50 Ohms Professional coax jumper made with ULTRAFLEX 7 and 2 clamp connectors with PTFE insulation and heatshrink sleeve with resin.
Professional coaxial jumper. 50 Ohms 1/2" superflexible coaxial RosenbergerSLink SL 012S PE provided with two DIN 7/16 connectors (1 straight female + 1 right-angle male). Length: 1,50m.
Mounting of your connector on ULTRAFLEX 10 and protection by a heat-shrink sleeve including a thermoplastic resin (connector not included in the assembly price)
1m 50 Ohms Professional coax jumper made with ULTRAFLEX 10 and 2 clamp connectors with PTFE insulation and heatshrink sleeve with resin.
2nd HAND: Professional coaxial jumper. 50 Ohms 1/4" superflexible coaxial RosenbergerSLink provided with two DIN 7/16 connectors (1 straight female chassis + 1 right-angle male). Length: 1,20m.
1m 50 Ohms Professional coax jumper made with ULTRAFLEX 7 and 2 clamp connectors with PTFE insulation and heatshrink sleeve with resin.
Professional low loss pigtail. 50 Ohms coaxial SUHNER S03262 B-60 (4.6mm) provided with two SMA-male right angle connectors. Length: 103cm.
0.5m 50 Ohms Professional coax jumper made with ULTRAFLEX 7 and 2 clamp connectors with PTFE insulation and heatshrink sleeve with resin.
Mounting of your connector on ULTRAFLEX 7 and protection by a heat-shrink sleeve including a thermoplastic resin (connector not included in the assembly price)
