7 el. 10m Yagi
10 meter 7 element beam Yagi (28 MHz) DXBeam (Ref. DXM10-7)
10 meter 7 element beam Yagi (28 MHz).
Boom made from 60 to 50mm tube.
Elements made from 18 to 12mm tube.
• Forward gain in free space (dBi): 12
• F/B ratio (dB): 32
• Frequency coverage (MHz): 28.000 - 28.900
• Bandwidth @ 1.5 VSWR (kHz): 1000
• Feed impedance (ohms): 50
• Power handling (kW): 5
• Longest element (m)/(ft): 5.41/17.7
• Boom length (m)/(ft): 12/39.3
• Turning radius (m)/(ft): 6.8/22.3
• Weight (kg)/(lb): 23/50.6
• Wind survival (km/h)/(mph): 130/80.8
• Standard Mast size (mm)/(inch): 50/2 (55/2.25 or 60/2.50 optional at no extra cost)
Insulated guying of the boom
This antenna is supplied with two guys in polyester (longevity > 25 years), stainless steel tensioner/cable clamps and guy clamp that will be fixed to the mast (diameter choice).
Lateral guying to the boom recommended
Should you live in a region where wind, snow or ice are common place, we recommend adding lateral guying to the boom. This addition could also be of interest to those who have towers without tower tram systems. It prevents the boom from being subjected to unnecessary mechanical stress during its installation. If you choose to add this diamond shaped guying yourself, be sure to do so using non-metallic cables.
>> Lateral guying to the boom kit
2 kinds of grease are supplied with your antenna:
• Aluminum contact grease: Professional grease containing 30% aluminum particles, recommended for the assembly of aluminum antenna tubes. Prevents binding, corrosion and the formation of aluminum oxide, and allows easy dismantling of antennas after several years.
• Copper conductive grease: Professional conductive grease with a copper base, recommended for all hardware requiring a sound and lasting electrical contact. Prevents oxydisation, damp ingress, and limits chemical reaction between stainless steel and aluminum.
Balun or no Balun ?
• This antenna does not require any balun.
• To avoid having stray current on the braid of a coaxial cable (often the cause of RF and/or TVI/BCI), you can make your own 1:1 choke balun with coaxial cable. Explanations are provided with antenna assembly instructions. (See also our F.A.Q).