N-Male connector for 5mm coaxial
N mâle 50Ω clamp connector for 5mm flexible coaxial cables. Sherlock system. Gold plated centre pin and Teflon (PTFE) insulation.
There are 145 products.
N mâle 50Ω clamp connector for 5mm flexible coaxial cables. Sherlock system. Gold plated centre pin and Teflon (PTFE) insulation.
Universal mounting bracket which allows for the lengthening of a tube or to make an arm with a 90° offset. ERARD 800998.
N Chassis Mount Socket 4 holes. Gold plated centre pin and Teflon (PTFE) insulation.
Insulating mastic, rubbery, self-sealing, black in colour. Resistant to water and ozone. Supple, large and thick, it can be stretched to suit the application. Wide range of working temperature: up to +130°C (+90°C continuous). 1m X 51mm.
BNC mâle 50Ω connector for flexible coaxial cables from 10 to 11mm. Sherlock system. Gold plated centre pin and Teflon (PTFE) insulation.
Heat shrink sleeves, 40 cm long. Use diameter 18 to 6 mm (shrink ratio 3:1). Interior covered in a thermoplastic resin.
The "peace of mind" pack for your antennas and connections with these two greases (copper and aluminium) at a reduced price.
SO239 Chassis Mount Socket (UHF female) 2 holes. Gold plated centre pin and Teflon (PTFE) insulation. Threading standard.
200m insulating 2.6mm line for guying of antennas. Excellent performance in all climatic conditions (water, sun, icing), high breaking strain, very good HF insulation, more than 25 years lifetime!
200m insulating 3mm line for guying of antennas and tubular masts. Excellent performance in all climatic conditions (water, sun, icing), high breaking strain, very good RF insulation, more than 25 years lifetime!
Thick heat shrink sleeves, 20 cm long. Use diameter 56 to 17 mm (shrink ratio 3:1). Interior covered in a thermoplastic resin. Ideal for aerial self repair.
300m insulating 2.6mm line for guying of antennas. Excellent performance in all climatic conditions (water, sun, icing), high breaking strain, very good RF insulation, more than 25 years lifetime!
2 thick heat shrink sleeves, 10 cm long. Use diameter 12 to 3 mm (shrink ratio 4:1). Interior covered in a thermoplastic resin.
PL-259 connector (UHF) with soldering for cables between 7 or 7.3mm. Gold plated centre pin and Teflon (PTFE) insulation.
300m insulating 3mm line for guying of antennas and tubular masts. Excellent performance in all climatic conditions (water, sun, icing), high breaking strain, very good RF insulation, more than 25 years lifetime!
Universal grounding kit for all coaxial cable (rigid, semi-rigid or flexible) to a diameter of 1/2 inch.
Heat shrink sleeves, 25 cm long. Use diameter 9 to 3 mm (shrink ratio 3:1). Interior covered in a thermoplastic resin.
Cable equipped with clip and copper terminal. Low cost universal grounding cable for all coaxial cable (rigid, semi-rigid or flexible) to a diameter of 1/2 inch.
PVC adhesive tape 25m x 38mm x 0.13mm, electrical quality coated in very strong solid rubber which particularly allows it to be stretched for easier application. Working temperature from -10ºC to +80ºC.
SMA male to SO239 (PL259 female) adapter 50Ω. Gold plated and PTFE insulation.
PL-259 connector (UHF) with soldering for cables between 5mm. Gold plated centre pin and Teflon (PTFE) insulation.
Aluminium bracket and stainless steel hardware for radioelectric contacts
Special professional grease for telescopic masts or towers that use the "Hazer Tram" type of system. Conceived for cables, pulleys and winches subjected to high loads. Good water resistance.
Multi-use mount for wall, drawbar of caravan... for mast Ø 25 to 50 mm. ERARD 800880
10 bolts (bolt, screw, washers and lock washers) Ø M 8mm, 25mm long, in stainless steel.
Special professional grease for antenna rotors. Conceived for bearings, gears, and thrust bearings subject to extreme pressure. Completely insoluble in water. Excellent adherence in sea water.
Stainless steel bracket and hardware for radioelectric contacts, equipped with 1.5m cable with 2 terminals and hardware.