PL-259 Connector for 10-11mm coaxial
PL-259 connector (UHF) with soldering for cables between 10 and 11mm. Gold plated centre pin and Teflon (PTFE) insulation.
PL-259 connector (UHF) with soldering for cables between 10 and 11mm: RG213, RG214, RG8, KX4...
Gold plated centre pin and Teflon (PTFE) insulation.
• This connector is much less suitable for new generation cables with foil and foam dielectric as: Ecoflex 10, Ultraflex 10, Aircom Plus, H2000 Flex, H1000, LMR400, RF400, Heatex 10, MMR400...
• Beware of cheap PL259! The central insulation of the connector is often of imitation PTFE. The direct result is that the centre pin of the connector is bent by the heat of the soldering iron, especially as the body has to be very hot to solder the braid! Also the connector and the coax lose their initial characteristics. This problem is exacerbated when a linear amplifier is used.
Insulating mastic, rubbery, self-sealing, black in colour. Resistant to water and ozone. Supple, large and thick, it can be stretched to suit the application. Wide range of working temperature: up to +130°C (+90°C continuous). 1m X 51mm.
PL-259 PRO connector (UHF) without soldering the ground contact (assembly as with an N type connector - Sherlock system), for all cables between 10 and 11mm and specially Ultraflex10 and Ecoflex10. Gold plated centre pin and Teflon (PTFE) insulation.