1m 50 Ohms Professional coax jumper made with ULTRAFLEX 7 and 2 clamp connectors with PTFE insulation and heatshrink sleeve with resin.
The connections between the different devices of a station (transceiver, wattmeter, amplifier, antenna tuner, switch, etc.) have to be of the highest quality and designed to last. DX AVENUE has chosen to produce and test its pigtails itself, which allows to guarantee professional quality. It would have been more economical to provide them, as some do, with low-cost or crimp plugs but our choice is the Teflon (PTFE) clamp connector models which have contributed to the reputation of DX AVENUE.
• Connectors : PL-259 clamp with PTFE insulation
• Coaxial cable : ULTRAFLEX 10
• Diameter : 10,3mm
• Lengh : 1m
• Allowable power : 4,1 kW @ 28 MHz (3,2 kW @ 50 MHz)
• Heatshrink sleeve with resin
The heatshrink sleeve with resin reinforces the cable where it is generally subject to stress.
The clamp connectors with Teflon insulation and gold pin are those sold by DX AVENUE for years. The length of the thread allows them to be tightened perfectly well on all SO-239s on the market, even the shortest ones available on some devices.
Each pigtails is rigorously tested with an analyzer.
Mounting of your connector on ULTRAFLEX 7 and protection by a heat-shrink sleeve including a thermoplastic resin (connector not included in the assembly price)
1m 50 Ohms Professional coax jumper made with ULTRAFLEX 7 and 2 clamp connectors with PTFE insulation and heatshrink sleeve with resin.
1m 50 Ohms Professional coax jumper made with ULTRAFLEX 10 and 2 clamp connectors with PTFE insulation and heatshrink sleeve with resin.
2nd HAND: Professional coaxial jumper. 50 Ohms 1/4" superflexible coaxial RosenbergerSLink provided with two DIN 7/16 connectors (1 straight female chassis + 1 right-angle male). Length: 1,20m.
Professional coaxial jumper. 50 Ohms 1/2" superflexible coaxial RosenbergerSLink SL 012S PE provided with two DIN 7/16 connectors (1 straight female + 1 right-angle male). Length: 1,50m.
Mounting of your connector on ULTRAFLEX 10 and protection by a heat-shrink sleeve including a thermoplastic resin (connector not included in the assembly price)
0.5m 50 Ohms Professional coax jumper made with ULTRAFLEX 7 and 2 clamp connectors with PTFE insulation and heatshrink sleeve with resin.
Professional low loss pigtail. 50 Ohms coaxial SUHNER S03262 B-60 (4.6mm) provided with two SMA-male right angle connectors. Length: 103cm.
1m 50 Ohms Professional coax jumper made with ULTRAFLEX 7 and 2 clamp connectors with PTFE insulation and heatshrink sleeve with resin.
