10 pcs 10mm insulated ring terminals

10 pcs 10mm insulated ring terminals for wire up to 6 mm²

• Packet of 10 pieces

• Crimping: wire from 4 to 6mm² (AWG 12-10)

• Solder: wire up to 6 mm²

• Maximum current: 48 Amperes

• 1 mm tin-plated copper

Dimensions

• D1 : 3,5 mm

• D2 : 10,3 mm

• D3 : 15,1 mm

• D4 : 6,0 mm

• L : 28,2 mm

• L1 : 14,5 mm

Advice from DX Avenue

• If the terminal has to be soldered, it can be useful to remove the yellow insulation, especially if it is then going to be covered by heat shrink tubing in which case it is sufficient to heat it a little (soldering iron, heat gun or lighter) and to twist the insulation until it can be removed.